|
Click for details | 1/2 ounce bottle of Titan oil-based rubber stamp ink. Available in black, blue, red, green, violet, orange, magenta, pink, yellow, brown, and sea blue.
Compatible with Titan and Shiny Eminent flash-based pre-inked rubber stamps. You must match the refill ink to your existing stamp ink color. To refill, remove the handle from your stamp and apply 6 to 8 drops into the inking well. Let sit for 1 hour. Repeat as necessary until the impressions darkens. | |
|
Click for details | 2 oz. oil-based refill ink for use with MaxLight pre-inked stamps.
This oil-based ink is formulated for use with MaxLight pre-inked stamps. To use, remove the stamp handle and place a few drops into the back of the stamp. Let stand overnight. Repeat if necessary.IMPORTANT: Because this ink is specifically designed for MaxLight pre-inked stamps, attempting to re-ink with any other brand may ruin your stamp. This is especially the case with self-inking stamps, which employ water-based ink, rather than oil-based ink. | |
|
Click for details | 20 cc bottle of refill ink for use with Brother stamps.
This ink is formulated for use with Brother pre-inked stamps. The ink is oil-based and not washable. To use, remove the handle from your Brother stamp and apply up to 5 drops into each hole. Keep the stamp facing down until the ink begins to flow out. Do not mix colors; blue ink should be used with blue stamps, black ink with black stamps, etc.
IMPORTANT: Because this ink is specifically designed for Brother stamps, attempting to re-ink any stamp other than a Brother will likely ruin it. | |
|
Click for details | 28 ml bottle of refill ink for use with Trodat premium self-inking seal stamps.
This water-based ink is formulated for use with Trodat Premium Self-inking Stamps. To use, remove the ink pad from your Premium Self-inking Stamp and apply up to 20 drops to the inking surface. Please be careful not to overink, and do not mix colors.
IMPORTANT: Because this ink is specifically designed for Trodat Premium Pre-inked stamps, attempting to re-ink any stamp other than a Trodat may ruin your stamp. | |
|
Click for details | 1/2 fluid oz.
Stingray refill ink for pre-inked Stingray and Ultimark stamps.
Stingray re-inking fluid can be used to re-ink any Stingray stamp. The process is easy. Simply pull the handle off the Stingray stamp and add several drops of re-inking fluid to the ink tower. Let stand for 2-3 hours. | |
|
Click for details | Pocket-sized seal impression inker. Highlights circular embosser seal impressions up to 1.75 inches in diameter.
To make your embosser impressions photographically reproducible, simply remove the lid and stamp the inking surface onto your raised seal impression. Highlighter should only be used on paper. Not for use on metallic seal stickers | |
|
Click for details | Water-based stamp ink for use with self-inking stamps and rubber stamp pads.
2 fluid ounce bottle. Compatible with Trodat Printy (4912, 4913, and other models), Vision, Ideal, 2000 Plus Printer (30, 40, and other models) and many other brands of self-inking rubber stamps and pads.
Each 2 fluid ounce (60 cc.) bottle contains enough ink for thousands of additional stamp impressions.
When re-inking, ink may be applied directly to a stamp's built-in stamp pad in most cases. If your stamp included re-inking holes, they may also be used. Pleaes follow the directions for your stamp.
THIS INK IS NOT COMPATIBLE WITH ULTIMARK, STINGRAY AND OTHER PRE-INKED STAMPS. | |
|
Click for details | 2 oz. water-based refill ink for use with Maxum, MaxStamp and other brands of self-inking stamps and stamp pads.
This water-based ink is formulated for use with Maxum, MaxStamp and other brands of self-inking stamps and stamp pads. To use, simply apply directly to the pad and let it soak in. Repeat if necessary.IMPORTANT: This ink is specifically designed for self-inking stamps that use water-based inks. It is not compatible with most pre-inked stamp brands and using it to fill other brands may ruin your stamp. | |
|